6
A
CCESSORIES
I
NCLUDED
:
•
2-1/2 Square Cap for Stand Legs (4)
•
Velcro, Black (to secure caps to stand legs)
•
Snitty Safety Knife
•
Image Roll Cleaner
•
Roll Cleaning Towel
•
Owner’s Manual
U N P A C K I N G , S E T - U P A N D I N S T A L L A T I O N
O
NLY SKILLED PERSONNEL SHOULD PERFORM
INSTALLATION
. R
EAD AND COMPLY WITH ALL
WARNINGS AND FOLLOW THE PROPER
INSTALLATION PROCEDURES AND SAFETY
GUIDELINES
.
•
Take into account the weight of the laminator (570-
lb./258 kg shipping weight) when moving. Use
equipment with which the weight can be safely
lifted. The laminator is transported on a wooden
pallet (skid). If your laminator is still on its skid, you
can move it with a forklift to put it near its place of
use.
IMPORTANT! Set the forks of the forklift to
the maximum lifting width of the laminator, so
the laminator’s center of gravity is central
between the forks.
•
NOTE:
We recommend that you save the transport
bolts, nuts and plates of the shipping crate for any
major moves that you plan to make with the
laminator in the future.
•
Remove the transport bolts from the skid’s
transport plates with an open-end wrench or
adjustable wrench. Using the wrench, back the bolt
up enough to clear the cabinet castors for ease in
moving.
•
Your laminator has castors to allow for easy
moving. Roll the laminator to the location it will be
used. (See Workspace Area Diagram – Figure 1).
•
Lock the castors once it is in place and remember to
unlock them before moving the laminator again.
Figure 3. Moving the laminator with a forklift.
