26
P R O C E S S C O N T R O L S H E E T
Process: _________________________________
Application Use: ___________________________
Top Unwind
Shaft:__________________________
Bottom Unwind
Shaft: _______________________
C
ONTROL
P
ANEL
S
ETTINGS
Top Roller Temp: __________________________
Bottom Roller Temp: ________________________
Motor Speed Setting: ________________________
Program Preset ____________________________
W
EBBING
S
ETTINGS
Web Tension Top Unwind
Shaft:
Light ________/ Med. _________/ Heavy _________
Web Tension Bottom Unwind
Shaft:
Light ________/ Med. _________/ Heavy _________
Nip Setting: ________ _______________________
Images: Sheet Fed ___________/ Roll Easel _______
NOTE: We recommend that you make a
photocopy of this page. With each successfully run
application, record the process and settings and a
diagram of the webbing procedure. Keep the record
so the application can be repeated at a later date.
HINT: If a standard image is made available for
each new process then sales materials and samples
can be developed for reference.
Figure 19. Blank Webbing Diagram