www.seagullmodels.com
23
5) With both the rudder servo and rudder
centered, mark the rudder pushrod at the hole
it crosses in the rudder servo arm using a felt-
tipped pen.
6) Enlarge the outer hole in the rudder servo
arm using a drill bit. Bend the pushrod wire at
the mark made in the last step. Pass the wire
through the servo arm and secure it using a
nylon wire keeper. Remove any unused arms
from the servo horn.
7) Elevator and rudder pushrods assembly follow pictures below.
8mm.
M2 lock nut .
M2 clevis.
