www.seagullmodels.com
11
Rudder servo .
Elevator servo .
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 PCS.
Elevator servo arm.
Rudder servo arm.
Throttle servo arm.
MOUNTING THE ENGINE.
Switch.
Install the switch into the precut hole in the
side of fuselage.
INSTALLING THE SWITCH.
115mm.
2) Use a pin drill and 2mm drill bit to drill a
small indentation in the mount for the engine
mounting screw.
1) Position the engine with the drive washer
(115mm) forward of the firewall as shown.
3) Use a drill to drill the four holes in the engine
mount rails.
