LASER 200
Instruction Manual
20
3) Connect the elevator and rudder servos
to your radio’s receiver and turn on the sys-
tem. Set the trim tabs on the transmitter to
neutral and center the servo arms. The eleva-
tor and rudder servo arms should be perpen-
dicular to the servos.
4) One at a time, hold the pushrods in po-
sition over the respective servos to check for
proper servo direction. If any servo turns in
the wrong direction, switch your radio’s re-
versing switches as necessary to achieve the
correct direction.
Control horn.
Connector.
Pushrod.
Metal clevis.
2) Rudder pushrods assembly follow
picture below.
PUSHROD INSTALLATION.
1) Elevator pushrods assembly follow
pictures below.
Metal clevis.
Control horn.
Pushrod.
Connector.
Rudder control horn.
Elevator control horn.
