Seagull Models JU-87 STUKA, Assembly Manual

Page: 36 / 42

JU-87
Instruction Manual.
36
The decals are sticky-back type. Most
are factory die-cut to shape. If you want
to trim the edges closer, use a sharp #11
hobby knife. Small decals can be applied
by simply removing the paper backing
sheet, and then lay the decal in position.
APPLY THE DECALS.
For the larger decals we recommend a
“wet” application method - 1) Peel the
paper backing sheet off the decal.; 2)
Use a soapy water product (like win-
dow cleaner) to spray the adhesive side
of the decal. Also spray the area of the
model where the decal goes.; 3) Lightly
place the decal onto the wet surface of
the model. The liquid cleaner will keep
the decal from sticking to the model, to
give you time to shift it around into exact
position.; 4) Once in position, use a piece
of stiff cardboard to squeegee the excess
liquid out from under the decal. Squee-
gee repeatedly, removing all excess liquid
and air bubbles. Mop up the liquid with a
paper towel. Allow to dry overnight.
INSTALLING BATTERY - RECEIVER.
1) Plug the servos leads and the switch
lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
2x8mm