JU-87
Instruction Manual.
2
Thank you for choosing the
JU-87
ARF by
SG MODELS
. The
JU-87
was designed
with the intermediate/advanced sport flyer in mind. It is a semi scale airplane which
is easy to fly and quick to assemble. The airframe is conventionally built using balsa, ply-
wood to make it stronger than the average ARF, yet the design allows the aeroplane to be
kept light. You will find that most of the work has been done for you already. The motor
mount has been fitted and the hinges are pre-installed. Flying the
JU-87
is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read
this manual throughly before starting assembly of your
JU-87
. Use the parts listing below to
indentify all parts.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & REPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C model Flying Club. R/C Model Flying Clubs offer a variety of
training procedures designed to help the new pilot on his way to successful R/C flight. They
will also be able to advise on any insurance and safety regulations that may apply.
INTRODUCTION.
WARNING.
KIT CONTENTS
1
5
2
8
3
3
2
2
4
6
7
Summary of Contents for JU-87 STUKA
