www.seagullmodels.com
3
Please contact Horizon Hobby for product support
and technical assistance at
877-504-0233
.
Replacement parts are available from your local
dealer or through Horizon Hobby.
HORIZON HOBBY DISTRIBUTIONS INC
4105 Fieldstone Rd, Champaign, IL 61822-USA
TOOLS & SUPPLIES NEEDED.
!
Thick cyanoacrylate glue.
!
30 minute epoxy.
!
5 minute epoxy.
!
Hand or electric drill.
!
Assorted drill bits.
!
Modelling knife.
!
Straight edge ruler.
!
2mm ball driver.
!
Phillips head screwdriver.
!
220 grit sandpaper.
!
90° square or builder’s triangle.
!
Wire cutters.
!
Masking tape & T-pins.
!
Thread-lock.
!
Paper towels.
To avoid scratching your new aeroplane
we suggest that you cover your workbench
with an old towel. Keep a couple of jars or
bowls handy to hold the small parts after you
open the bags.
Please trial fit all parts. Make sure you
have the correct parts and that they fit and are
aligned properly before gluing! This will ensure
proper assembly as the
EXTRA 260
is made
from natural materials and minor adjustments
may have to be made.
The paint and plastic parts used in this
kit are fuel proof. However, they are not tolerant
of many harsh chemicals including the follow-
ing: paint thinner, cyano-acrylate glue accel-
erator, cyanoacrylate glue de-bonder and
acetone. Do not let these chemicals come in
contact with the colours on the covering and
the plastic parts.
Tail section assembly
!
(1) Horizontal stabilizer/ elevator
halves.
!
(1) Rudder halves.
Some more parts.
HARDWARE PACK
COWLING
Landing gear.....
NOTE.
