EXTRA 260.
Instruction Manual.
16
Landing
gear.
!
4) A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
Repeat the process for the other wheel.
!
1) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
!
2) Using the hardware provided, mount the
main landing gear to the fuselage.
INSTALLING THE MAIN LANDING GEAR.
MOUNTING THE ENGINE.
!
1) Install the pushrod housing through the
predrilled hole in the firewall and into the servo
compartment. The pushrod housing should
protrude 1/4" out past the front of the firewall.
Make a Z-Bend 1/4" from one end of the plain
wire pushrod.
!
2) Place your engine onto the engine
mount. Adjust the engine is centered of the
edges of the engine case.
!
4) Remove the engine. Using an drill bit,
drill the mounting holes through the engine
mount at the four locations marked.
!
3) When you are satisfied with the align-
ment, mark the locations of the engine
mounting.
6 X 20mm.
140mm.
lite-plywood block.
