Seagull Models Decathlon 60-85cc-3D, Assembly Manual

Page: 11 / 62

11
11
.
12 .
13
.
Set the flap control at the transmitter to
the down flap position. Adjust the flap
travel at the transmitter until it matches
the control throws listed in this manual.
Fit the flap linkage cover into position.
Check the operation of the flap to make
sure the cover does not interfere with the
flap linkage.
Use canopy glue to attach the cover to the
wing. Use low-tack tape to keep the cover
in position until the adhesive fully cures.
14
.
9
.
10 .
Trim the flap linkage cover using a hobby
knife and hobby scissors.
3x10mm