Seagull Models Decathlon 60-85cc-3D, Assembly Manual

Page: 3 / 62

3
KIT CONTENTS
SEA314 DECATHLON 60-85cc-3D
1. Fuselage
2. Wing set (2)
3. Tail set (2)
4. Canopy
5. Cowling
6. Wing tube
7. Pilot
8. landing gear
9. Fuel tank
10. Tail wheel
11. Pushrod set
12. Ep Motor box
ADDITIONAL ITEMS REQUIRED
TOOLS & SUPPLIES NEEDED
Thin cyanoacrylate glue.
Medium cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder’s triangle.
Wire cutters.
Masking tape & T-pins.
Thread-lock.
Paper towels.
�
60-85cc gasoline engine.
�
Computer radio 7 channel with 9
servos.
�
Glow plug to suit engine.
�
Propeller to suit engine.
�
Protective foam rubber for radio
system.
WINGTIP BULBS
Please see below pictures.
2
.
1 .
3
.
Two white lights for cowling and rud-
der, the green light for right wing tip, and
the red light for left wing tip. They are
designed to operate on voltages 12 volts.
Connect four lights into switch circuit so
that optional the different flashes mode.