CHRISTEN HUSKY
Instruction Manual.
22
22
.
3 x 20mm.
3x25 mm.
Aluminum tail
landing gear.
INSTALLING BATTERY - RECEIVER.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery
pack lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the
bottom of fuselage using a plastic tape.
Recomend Wrapping Receiver in
Plastic Bag or Baloon if flying off water.
INSTALLATION PILOT.
1) Locate items necessary to install pilot,
seats.
2) A scale pilot is included with this ARF.
The Seagull Pilot included fitting well to
the cockpit. (or you can order others scale
pilot figures made by Seagull factory.
They are available at Seagull distributors.)
If you are going to install a pilot figure,
please use a sanding bar to sand the base
of the figure so that it is flat.
Battery.
Receiver
