CHRISTEN HUSKY
Instruction Manual.
14
3) Install the muffler and muffler exten-
sion onto the engine and make the cutout
in the cowl for muffler clearance. Connect
the fuel and pressure lines to the carbu-
retor, muffler and fuel filler valve. Secure
the cowl to fuselage using the M3x10mm
screws.
Servos
.
Small weight
.
Thread
.
INSTALLING THE SPINNER.
Install the spinner backplate, propeller
and spinner cone.
The propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propeller
comes in contact with it.
INSTALLING THE AILERON - FLAP
SERVOS.
Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
2) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
