Seagull Models Cessna Turbo Skylane 182, Assembly Manual

Page: 27 / 45

27
15 .
14 .
16 .
Battery
INSTALLING THE SPINNER
- Install the spinner backplate, propeller
and spinner cone.
1 .
he propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
2 .
INSTALLING THE HORIZONTAL
STABILIZER
- Using a ruler and a pen, locate the cen-
terline of the horizontal stabilizer, at the
trailing edge, and place a mark. Use a tri-
angle and extend this mark, from back to
front, across the top of the stabilizer. Also
extend this mark down the back of the
trailing edge of the stabilizer.