AT 6 - TEXAN.
Instruction Manual.
14
FUEL TANK.
INSTALLING THE STOPPER ASSEMBLY.
1) Using a modeling knife, carefully cut off
the rear portion of one of the 3 nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
2) Using a modeling knife, cut one length of
silicon fuel line. Connect one end of the line to
the weighted fuel pickup and the other end to
the nylon pickup tube.
Snap keepper.
INSTALLING THE ENGINE MOUNT.
See pictures below:
M2 lock nut.
Snap keepper.
Mark point.
Pen.
Cut.
Repeat the procedure for the other wing
half
.
4mm X 20mm.
