background image

Momentus 5400.4 SATA Product Manual, Rev. A

5

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and 

power to operational levels.

***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby 

modes will not contribute to battery power consumption.

2.2

Formatted capacity    

 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment 

and formatting.

2.2.1

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, 
where n is the number of guaranteed sectors as defined above.

See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-
bit addressing support of drives with capacities over 137 Gbytes.

2.3

Default logical geometry   

LBA mode

 

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, 
where n is the number of guaranteed sectors as defined above.

Model

Formatted capacity*

Guaranteed sectors 

Bytes per sector

ST9250827AS

250 Gbytes

488,397,168

512

ST9200827AS

200 Gbytes

390,721,968

512

ST9160827AS

160 Gbytes

312,581,808

512

ST9120817AS

120 Gbytes

234,441,648

512

Cylinders

Read/write heads

Sectors per track

16,383

16

63

Summary of Contents for ST9120817AS - Momentus 5400.4 120 GB Hard Drive















































Reviews: