background image

Seagate Surveillance HDD Product Manual, Rev. C

28 

www.seagate.com

SATA Interface

4.3.4 S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors
predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is
likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is
limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the

Draft

 

ATA-5 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4

H

) that eliminates

unnecessary drive returns. The diagnostic software ships with all new drives and is also available at:

http://seatools.seagate.com

.

This drive is shipped with S.M.A.R.T. features enabled. 

Table 9

 below shows the S.M.A.R.T. command codes that the drive

uses.

Table 9

S.M.A.R.T. commands

Code in features register

S.M.A.R.T. command

D0

H

S.M.A.R.T. Read Data

D2

H

S.M.A.R.T. Enable/Disable Attribute Autosave

D3

H

S.M.A.R.T. Save Attribute Values

D4

H

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5

H

S.M.A.R.T. Read Log Sector

D6

H

S.M.A.R.T. Write Log Sector

D8

H

S.M.A.R.T. Enable Operations

D9

H

S.M.A.R.T. Disable Operations

DA

H

S.M.A.R.T. Return Status

Note

If an appropriate code is not written to the Features Register, the 
command is aborted and 0

x

04 (abort) is written to the Error register.

Summary of Contents for ST8000VX000































Reviews: