Seagate ST3285N, Product Manual

Page: 95 / 151

Error code (hex)
Description
Byte 12 Byte 13
2A 00
Some parameters were changed by another
initiator.
2A 01
The Mode Select parameters were changed
by another initiator.
2B 00
The microcode was downloaded.
2F 00
The tagged commands were cleared by
another initiator.
30 01
The media cannot be read because the format
is not recognized.
30 02
The media cannot be read because the format
is incompatible with certain parameters.
31 00
The media format is corrupted.
31 01
The format command failed.
32 00
There are no spare defect locations available.
32 01
An error occurred when the defect list was
being updated.
37 00
A rounded parameter caused an error.
3D 00
The identify message contains invalid bits.
3F 00 The target operation command was changed.
3F 01 The microcode was changed.
3F 02
The drive was operating as a SCSI drive and
is now operating as a SCSI-2 drive, or vice
versa.
3F 03 The inquiry data was changed.
40 00 The RAM failed.
40 8 x
A correctable ECC error occurred; x equals
the length of the error.
40 90 A configuration error occurred.
40 A0
The self-test routine discovered an error in a
ROM.
40 A1
The self-test routine discovered an error in the
processor RAM.
40 A2
The self-test routine discovered an error in the
buffer RAM.
ST3655 Family SCSI Drives Product Manual, Rev. A 85