Seagate Enterprise Capacity 3.5 HDD v7 SAS Product Manual, Rev. C
7
1.0
Scope
This manual describes Seagate® Enterprise Capacity 3.5 HDD v7 SAS (Serial Attached SCSI) disk drives.
Enterprise Capacity 3.5 HDD v7 drives support the SAS Protocol specifications to the extent described in this manual. The
SAS Interface Manual (
part
number
100293071)
describes the general SAS characteristics of this and other Seagate SAS drives.
Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be
predictive of future generation specifications or requirements. If designing a system which will use one of the models listed or future generation
products and need further assistance, please contact the Field Applications Engineer (FAE) or our global support services group as shown in See
“Seagate® Technology Support Services” on page 6.
Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.
.
512E models
Standard
Self-Encrypting (SED)
ST12000NM0027
ST12000NM0037
Note
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE) models
before a differentiation between drive-based encryption and other forms of encryption was necessary.
Note
The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data
at Rest” based on the standards defined by the Trusted Computing Group (see
www.trustedcomputinggroup.org
).
