Step 4 - A ach the front rails to the front of the rack
Position the left front rail on the cage nut on the left front rack post. Insert two 10-32 flat head screws into
two stepped washers. Use the screw/washer assemblies to fasten the left front rail to the left front rack
post.
Repeat the process for the right front rail and right front rack post.
Step 5 - A ach the back rails to the back of the rack
Position the back rails at the correct height on the rear rack posts. Insert two 10-32 flat head screws into two
Summary of Contents for Lyve Mobile Rackmount
