background image

©  2014 Seagate Technology LLC. All rights reserved.

Publication number: 100671510, Rev. C  February 2014

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or 
other countries. Constellation ES and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of 
its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply 
product endorsement by NIST, the U.S., or Canadian governments.All other trademarks or registered trademarks are the property of 
their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. 
Call 877-PUB-TEK1 (877-782-8351) to request permission.

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your 
computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed 
capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on 
various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating 
environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. 
Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import 
and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.

Document Revision History

Revision

Date

Description of changes

Rev. A

10/05/2011

Initial release.

Rev. B

10/31/2011

37.

Rev. C

02/13/2014

fc, 2, 9 & 53.

Summary of Contents for Constellation ST1000NM0023












































































Reviews: