C
HEETAH
15K.7 FC P
RODUCT
M
ANUAL
, R
EV
. E
9
3.5.1
Programmable drive capacity
Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select
Parameter List table in the
SCSI Commands Reference Manual
. Refer to the Parameter list block descriptor number of
blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently
formatted to have. A number in the number of blocks field that is less than the maximum number of LBAs changes the total
drive capacity to the value in the block descriptor number of blocks field. A value greater than the maximum number of LBAs
is rounded down to the maximum capacity.
3.6
F
ACTORY
-
INSTALLED OPTIONS
You may order the following items which are incorporated at the manufacturing facility during production or packaged before
shipping. Some of the options available are (not an exhaustive list of possible options):
• Other capacities can be ordered depending on sparing scheme and sector size requested.
• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit
damage. Units shipped individually require additional protection as provided by the single unit shipping pack. Users plan-
ning single unit distribution should specify this option.
• The
Safety and Regulatory Agency Specifications
, part number 75789512, is usually included with each standard OEM
drive shipped, but extra copies may be ordered.
3.7
U
SER
-
INSTALLED ACCESSORIES
The following accessories are available. All kits may be installed in the field.
• Evaluation kit, part number 73473641.
This kit provides an adapter card (“T-card”) to allow cable connections for two FC ports and DC power.
• Single-unit shipping pack.
