LOADING PRODUCT
To present your product in as an attractive and professional manner as possible, do not load any damaged items, and make sure
items are facing forward for easy identification by your customer.
Note:
The size of the item being vended must be larger than the Helix Coil, but smaller than the Product Chute, to vend correctly.
Never force an oversized item into the Helix Coil or Product Chute, nor attempt to vend an item that is smaller than the Helix Coil
as this will create problems and deter customers. (Fig.4)
1. To Load Product:
A.) Use the release latches and pull the desired Product Tray all of the way
forward. Product Tray will tilt down.
Note:
Pull out only one (1)
Product Tray at a time.
B.) Place product in proper size Helix Coil. Note: Bottom of product must
rest on the Product Tray and not on the Helix Coil. (Fig. 4) Load
each Product Chute from front to back.
Note:
Do not leave any spaces between items.
C.) Once Product Tray is loaded, lift the front of tray to level and push it back in. Repeat
above steps until all Product Trays are fully loaded.
To increase the length of the Helix Coil, white plastic Product Pushers can be snapped on the end. A supply of Product
Pushers are provided in the vendors hardware bag.
Special Note:
We suggest that you always partially fill the vendor with product and perform at least five (5) test vends. Test
vends can be performed easily by entering Service Mode and running "Individual Motor Testing". (See: Keypad and LED
Display, Individual Motor Testing.)
Figure 4
Loading Product
Correct - load
product between
Helix Coils,
resting on the
product tray
Incorrect
Product Tray
Columns
Helix Coil
Driver Motor
(behind
Product Tray)
Helix Coil
Driver
Figure 5
Delivery System
Note: “Home” position