The Bill Validator allows your customers to pay for their purchase with paper currency. Your optional Bill Validator is installed at
the factory, and is set to validate $1, and $5 bills, but will not accept $5's unless the Coin Chutes are nearly full. The Bill Validator
can be set to also accept $10, and $20 bills. Unless you intend to vend high-ticket specialty items from your vendor, your Bill
Validator need not accept $10 and $20 bills.
CAPACITY
The Bill Storage Box will hold approximately 500 dollar bills.
BILL RETRIEVAL
The bills your customers spend are kept in the Bill Storage Box.
1. To Retrieve Bills.
A.) Unlock and open the Front Door.
B.) Pull Tab forward and lift Bill Storage Box. (Fig. 13) Remove bills.
C.) Return empty Bill Storage Box.
REMOVING BILL VALIDATOR
From time to time it may be necessary to remove the Bill Validator for cleaning and clearing jams. The Bill Validator is front
mounted with four (4) Nylon Cap Nuts.
1. To remove the Bill Validator.
A.) Unlock and open the Front Door, unplug vendor.
B.) Disconnect Bill Validator from Wiring Harness.
Figure 12
Coin Hopper Removal
Coin Hopper
Ribbon Cable
Mounting Screws (3)
Figure 13
Bill Validator
Bill
Storage
Box
Push
Tab then
Lift Bill
Storage
Box
Tab
Nylon
Cap
Nuts (4)