1. Hold down button on left side with three horizontal lines
2. Navigate to the 6
th
page where you should see this screen
3. Using the silver button on the right select [CALIBRATION]
4. Press the silver button once more to begin the calibration
5. Move sticks and points to midpoint and press the silver button to confirm
6. Move the sticks and points along each extreme top, bottom, left, and right. During this step the knobs
should be turned to their extremes as well. Finally press the silver button to confirm
Page
38
EchoBoat-160
RCV / ASV Remote Calibration
Perform these steps if your vessel appears to not respond promptly to commands
send via remote:
7. Your transmitter should now be properly calibrated
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
