Setting up the SmartCast
Double click on the SmartCast icon on the desktop
S
et the COM port from the drop-down menu and set the baud rate using the arrows, only the
value 57600 is available.
Click “Connect
Smart
Cast”, the display should look like the one below if everything was don
e right.
Step 1
Step
2
Step
3
Step
4
If not known, find the COM port labeled “Arduino Uno”. This can be done by typing “Device
Manager” in the search bar in the boZom le[ corner of the screen. Once there find
“Ports (COM
& LPT)” such as the example below and record the COM port number (in this
case COM
8
)
Seafloor Systems, Inc. | [email protected] | +1(530) 677-1019
Page
30
