Using the SEA-DOO
®
SEASCOOTER
™
GTI
for diving - adjusting the buoyancy.
Your SEASCOOTER
™
can be used for diving up to 30m/100ft
but will need to be adjusted for neutral buoyancy. The
SEASCOOTER
™
must never be adjusted for negative
buoyancy to avoid it sinking if accidentally released.
To adjust for neutral buoyancy follow these instructions
1. Make sure the SEA-DOO
®
SEASCOOTER
™
GTI is in
the Off position.
2. Remove the SEASCOOTER
™
from the water, give a
half turn to the Latches, remove them (see figure 4)
and remove the Buoyancy Control Chamber.
3. Open the Buoyancy Chamber and add a small amount
of rocks or a lead weight (see figure 5).
4. Replace the Buoyancy Chamber and the Nose Cone
and latches and place the SEASCOOTER
™
in the
water. If the SEASCOOTER
™
is neutrally buoyant it will
just float in the water.
5. If the SEASCOOTER
™
sinks, remove the weight until it is
neutrally buoyant.
If the SEASCOOTER
™
is still positively buoyant repeat step
3, until it is neutrally buoyant.
Rotate 180
o
and remove to open
Fig.4
8
7
Fig.5
CAUTION
If the SEASCOOTER
™
is later used for swimming or
snorkeling be sure to remove the weight from the Buoyancy
Chamber so the SEA-DOO
®
SEASCOOTER
™
GTI has
positive buoyancy.
