WARNING
If throttle lever does not automat-
ically return, do not operate wa-
tercraft and see your authorized
Sea-Doo dealer.
F01K01Z
1
2
1. Should move freely
2. Slight free-play must be present here
Engine Oil Change and Oil
Filter Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo dealer.
Valve Adjustment
There is no valve adjustment to be per-
formed on this engine.
Coolant Replacement
The coolant replacement should be
performed by an authorized Sea-Doo
dealer.
Fuel Injection System
The fuel injection system inspection
should be performed by an authorized
Sea-Doo dealer.
Fuel system pres-
surization should be conducted at the
same time.
Steering Alignment
When the handlebar is directed in
straight ahead position, the jet pump
nozzle should be in the same direc-
tion allowing the watercraft to run in
a straight line. The rear edge of side
vanes should be pointing out side by
approximately 20° when the handle-
bar is pointing straight ahead.
F18L0ZZ
1
1
1. Approximately 20° when handlebar is
pointing straight ahead
Refer to an authorized Sea-Doo dealer
if an adjustment is necessary.
WARNING
Ensure
the
handlebar
and
jet
pump nozzle operate freely from
side to side and are not stress-
ing the steering cable or brackets.
Never turn handlebar while some-
one is nearby rear of watercraft.
Keep away from steering moving
parts (nozzle, side vanes, linkage
etc.).
VTS Adjustment
(if so equipped)
Push on arrow pointing upward on VTS
button until the VTS stops. The nozzle
should be up without interfering with
the venturi.
92
______________________
Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 94
www.SeaDooManuals.net
Summary of Contents for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition
Page 1: ...www SeaDooManuals net ...
Page 136: ...www SeaDooManuals net ...
