SeaDoo GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition Operator'S Manual Download Page 47

Page: 47 / 136

Spare Spark Plug Holder

The storage basket features a spare
spark plug holder.

To keep spare spark plugs dry and pre-
vent shocks that might affect the ad-
justment or break them, a holder is
provided.

Unscrew cap counterclockwise to ex-
pose the holder and insert spark plug
in their holes. Reinstall cap.

F18L0HY

1. Storage basket
2. Spare spark plug holder cap
3. Spark plug holder

NOTE:

Adjust spare spark plug gap

according to SPECIFICATIONS before
installation.

NOTE:

Spare spark plugs are not sup-

plied with the watercraft.

23) Front and Rear

(bow/stern) Eyelets

Front (bow) Eyelet

Eyelets can be used for mooring, tow-
ing and as a tie-down point during trai-
lering.

F00L0EY

1. Front (bow) eyelet

Rear (stern) Eyelet

All Models except RXP

This eyelet allows a rope with a hook,
a closed end or an open end to be
attached.

F18L0RY

1. Rear (stern) eyelet

RXP Models

3 eyelets are available for your conve-
nience.

______________________

Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 48

www.SeaDooManuals.net

Summary of Contents for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition









































































































































Search results

Summary of Contents for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition

Reviews:

Related manuals for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition

Brands by name

Popular brands

SeaDoo GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition, Operator'S Manual

Search results

Summary of Contents for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition

Reviews:

Related manuals for GTX 4-Tec/ Supersharged/ Limited Supercharged/ Wakeboard Edition

Brands by name

Popular brands