Transport Systems Seacom AG
A 5502 / Rolltrailer 8
0’ 150t
Page 9 / 21
5
OPERATING INSTRUCTIONS
Intended use
The rolltrailer's intended use is for internal transport.
The driver of the tractor has to inspect the rolltrailer for detectable faults before the start of
operation.
Coupling
Reverse the truck towards the front of the rolltrailer, take care that the middle of the fifth wheel
is directing towards the king pin of the fixed gooseneck.
Then lift the fifth wheel coupling so that it is parallel to and under the gliding plate of the fixed
gooseneck.
Reverse the truck carefully till resistance is felt and fifth wheel has locked with king pin.
Make sure that the coupling is firmly engaged with the rolltrailer.
Connect brake lines.
Lift the rolltrailer until the front of it is approximately 100
– 150 mm over the ground.
Driving
The rolltrailer shall only be towed by suitable towing vehicles with a fifth wheel lifting capacity
of at least 37,5 t and a lifting height of at least 750 mm.
The transport of persons is not permitted.
The road surface should be in reasonable condition, and without obstacles.
In any case, the prescribed speeds and safety regulations must be observed.
The maximum permitted speed, straight ahead with full load of 150 t is 6 km/h.
In curves the speed should be reduced appropriately.
When reversing, seek a guide, if visibility is insufficient.
