Seac DRIVER, User Manual, Page: 8 / 28

8
• The hours digits flash: increase the value with the “U” button or decrease
with the “D”. Briefly press the “M” button to confirm.
• The 12 or 24 hour indication flashes. Use the “U” and “D” buttons to set the
desired option and briefly press “M” to confirm.
• The indication of the year flashes. Use the “U” and “D” buttons to set the
current year and briefly press “M” to confirm.
• The month digits flash: increase the value with the “U” button or decrease
with the “D”. Briefly press the “M” button to confirm.
• The day digits flash: increase the value with the “U” button or decrease with
the “D”. Briefly press the “M” button to confirm.
• On the “LENGTH UNIT” screen, select the unit of measure for measuring
depth: meters (m) or feet (ft). Use the U/D buttons to select “m” or “ft”, and
then briefly press the “M” button to confirm.
• On the “TEMP UNIT” screen, select the unit of measure for temperature:
degrees Celsius (°C) or degrees Fahrenheit (°F). Use the U/D buttons to
select “°C” or “°F”, and then briefly press the “M” button to confirm.
• On the “BUTTON BEEP” screen, you can enable/disable the button press
“beep” by selecting ON or OFF using the U/D buttons. Briefly press the “M”
button to confirm.
• The “LCD” screen shows the current firmware release and the level of LCD
contrast, which can be set on a scale from 1 to 10 using the U/D buttons;
press “M” to confirm your selection and exit “set time”.
SECOND TIME ZONE (T2)
From the watch screen, press the “U” button for five seconds. The second time
zone will appear, identified by the T2 icon on the upper left. If you would like
to set the second time zone (T2) as the primary (fixed), while the watch is
displayed, press and hold the “U” button for 5 seconds (until it beeps). The T2
icon will still be visible on the upper left. In this setting, briefly pressing the “U”
button will display the T1 for five seconds. To reset T1 as the primary display,
repeat the operation above.