Seac DRIVER, User Manual, Page: 23 / 28

DRIVER
23
DRIVER SERIAL NUMBER
The Driver serial number is engraved into the back of the case, on the side
opposite the PC-link contacts.
EC CERTIFICATION
The Driver is compliant with EC Directives.
CARE AND MAINTENANCE
• Keep your computer clean and dry. Do not expose the computer to chemical
agents, including alcohol. Use only fresh water to clean your computer,
removing all saline deposits. Leave the computer to dry naturally; do not
use jets of hot or cold air. A jet of pressurized air hitting the pressure sensor
could damage it irreparably.
• Do not expose the computer directly to the sun or to sources of heat above
50°C. Store the computer in a cool (5°C - 25°C) and dry place.
• Do not place the computer in a hyperbaric chamber.
The computer is designed for a reading accuracy of +/- 2%. The degree of
accuracy required by the European standards is +/- 3.5%.
European standards require that the unit be checked periodically to monitor
the precision of its depth and time readings.
• The warranty will be forfeited if the computer is opened by an unauthorized
service center.
• The computer is manufactured to withstand use in seawater, but after the
dive you must rinse it thoroughly in fresh water and not expose it to direct
sunlight or sources of heat to dry it.
• Check that there are no signs of humidity inside the display.
• Do not attempt to open, modify, or repair the computer yourself. Always
contact an Authorized Center or SEAC directly.
• WARNING!
If you observe any humidity inside the mineral glass, the Driver must be
taken to an authorized SEAC center immediately.