E-14
Mode dial
Zoom lever
Shutter
lever
Control dial
Control
wheel
External Controls
Zoom lever
Move the lever to the left and right to
control the zooming.
Control dial
Rotate the dial to control the control
ring of the camera.
Shutter lever
Push down the lever to control the
shutter of the camera.
Mode dial
Rotate the dial to switch the camera
mode.
Control wheel
Rotate this dial to control the camera.
The up, down, left and right (
▲
,
▼
,
,
) items can be selected by
using the control wheel in place of
the selector buttons.
Other control parts on the housing correspond to the operation parts of the
digital camera. Refer to the camera's instruction manual for details of each
function.
Other controls
CAUTION
After mounting the camera in the housing, make sure to check that all of
the housing's control parts work properly and the camera functions correctly
before underwater use.
E-13
Connecting the Strobe
Connect the strobe with the fiber-optic cable (option) when the strobe is
triggered by sensing the light from the camera's built-in flash.
CAUTION
Before inserting the fiber-optic cable, check to make sure that there are
no scraches or dirt on the connector surface. Scratches or dirt may
cause the strobe to malfunction.
To protect the surface from scratches or dirt, do not remove the caps from
the fiber-optic cable sockets when the cable is not inserted.
There is no possibility of water leaking from the fiber-optic cable socket
even if the fiber-optic cable/cable socket cap is removed underwater.
After the strobe is connected to the housing, make sure to check that the
connected strobe functions correctly before underwater use.
2
Insert the fiber-optic cable's
connector into the socket until
it stops
Remove the fiber-optic cable
socket caps
Do not remove the caps from
fiber-optic cable sockets not in use
to keep light from entering in.
1
Fiber-optic cable socket cap
