Sistemi elettronici
di Aperture Porte e Cancelli
11.
ELECTRIC CONNECTIONS OF THE INSTALLATION (Fig. 21)
2x
5
1,
2x ,5
1
3x1,5
1x1,5
1 5
2x ,
1
3x ,5
1,5
2x
x1
3
,5
6 1,5
x
x
8 1,5
1xRG58
1
2
3
4
11
5
6
7
8
9
10
1) Saturn
2) photocell Sx
3) photocell Dx
4) Mechanical safety edge
9) Warning notice
10) Junction box
11) Differential 16A - 30mA
12. RISK EXAMINATION
The points pointed by arrows in Fig. 22 are potentially
dangerous. The installer must take a thorough risk examination
to prevent crushing, conveying, cutting, grappling, trapping so
as to guarantee a safe installation for people, things and animals
(
)
Re. Laws in force in the country where the installation has been
made.
5) Key push botton
6) Flasher
7) Receiver
8) Antenna
NOTICE
SEA s.r.l can not be deemed responsible for any damage or
accident caused by product breaking, being damages or
accidents due to a failure to comply with the instructions herein.
The guarantee will be void and the manufacturer responsibility
(according to Machine Law) will be nullified if SEA Srl original
spare parts are not being used.
This is a quotation from the GENERAL
DIRECTIONS that the installer must read carefully before
installing. Packaging materials such as plastic bags, foam
polystyrene, nails etc must be kept out of children’s reach as
dangers may arise.
The electrical installation shall be carried out by a professional
technician who will release documentation as requested by the
laws in force (D.L.46/90).
Fig. 21
Fig. 22
5/30
PERIODIC MAINTENANCE
All the above described operations must be done exclusively by an
authorized installer.
10. SCREW COVER MOUNTING
At the end of the mechanical installation and after having
executed all the required adjustments, mount the two screw
covers on the operator as shown in Fig. 20.
Check the oil level (only Saturn 1000 and 2000)
(Use the oil level rod)
Change oil
Check the release functionality
Check the clutch functionality (1000 and 2000)
Check the distance between pinion and gear rack (1.5
mm)
Check the usury status of pinion and gear rack
Check the connection cables integrity
Check limit switch functionality and status in opening
and closing and the related small plates
Check the fixing screws
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
4 years
Fig. 20
cod. 67410325
REV 01 - 04/2007
ENGLISH
