SEA 235, Operator'S Manual

Page: 36 / 104

FUNCTION MENUS
31
UP
DN
SELECTING THE TRANSMIT POWER LEVEL
When transmitting, using the lowest amount of power required for reliable
communications will help prevent interference with stations located thousands of
miles away.
Repeatedly press until “POWER” is
displayed.
Pressing with “POWER” displayed
will prompt the operator to “PRESS+-”.
The different displays that appear with each
press of the or key are the three
transmit power levels
Press at the “HI PWR” display to set
the radio to 150 watts output during transmit.
Press at the “LO PWR” display to set
the radio output for approximately 75 watts
during transmit. The display’s “LOW”
indicator will appear to show the radio is set to
the
½ power setting.
Pressing at the “VLO PWR” display
will set the radio output for approximately 35
watts during transmit. The display’s “LOW”
indicator will flash to indicate the radio is set to
the
¼ power setting.
If is pressed on the “EXIT” display,
the power level will not be changed.
NOTE :
When the radio is setup to operate with a
tuner, and the tuner is not “matched” to the antenna, the radio’s “LOW” indicator will
appear. The radio will not go to high power until the tuner has “matched” the antenna
.
ENT
ENT
ENT
ENT
ENT
FNC