12
B. Automatic Keyboard Switch
：
C.The buzzer will sound during the switching:
D. Auto Detection for Active Port:
Press Right <Ctrl> + Right <Ctrl> + <S> + <Enter> enable the
automatic scan function. (The default interval time is 8 seconds)
Note: Press Right <Ctrl> + Right <Ctrl> + <S> + Time + <Enter> to
set the interval time of the automatic scan, the interval time can be
set from 8 to 999 seconds.
For example: The interval time of automatic scan function is 9
seconds, as shown as the figures.
Right <Ctrl> + Right <Ctrl> + <B> + <Enter>(The default setting is on)
Then press: Right <Ctrl> + Right <Ctrl> + <B> + <Enter> to turn off
the buzzer.
The default setting of the buzzer is “On”, the switch will make a
“Di” sound when the panel or hot-key operation succeed.
As shown as the figures:
( Please must plug the USB-B cables when using this function)
Right <Ctrl> + Right <Ctrl> + <T> + <Enter>
