10
The green light lights up means the USB-B cables is working fine.
Scan button lights up means the automatically scan function is on
Power button lights up means the power is on.
1, Panel Switch
：
Switching by pressing the panel switch
button to the corresponding connected device, the numbers of
switch button are corresponding to the numbers of connected hosts.
E.g.:Pressing button 1 on the panel, and the monitor will display
the PC connected to the port 1.
A, Manual Panel Switch:
While pressing button 5, the monitor will display the PC
connected to the port 5.
By that analogy, you can press the button and the monitor will
display the PC connected to the corresponding port.
B Automatic Scan by Pressing Panel Button:Pressing the [SCAN]
button on the switch panel, then the switch will enable
automatic cycle scan, pressing the [Scan] button again then can
stop automatic cycle scan.
