Sea Tel 6012-71 C-BAND, Installation Manual

Page: 47 / 101

Setup – Blockage Zones 6012-71 Installation Manual
8-1
8. Setup – Blockage Zones
The Blockage Zones function inhibits the antenna from transmitting within certain pre-set zones.
1. To set up the blockage zones go to the System
Configuration screen.
2. Enter a name for this particular blockage zone to
help you identify it (ie “Mast” or “Stack”).
3. Enter the counter-clockwise relative azimuth point
of the blockage zone in the REL Start field and the
clockwise point of the blockage zone in the REL End
field.
4. Likewise, for Elevation, enter the elevation angle,
below which the antenna will be blocked in the EL
field.
5. Repeat for other blockage zones (up to four).
6. When completed, click SAVE