Sea Tel 6012-12w, Installation Manual

Page: 76 / 130

6012-12W Installation Manual Stowing the Antenna
3. Install the pin bolt into the STOW hole
and tighten. This assures that it does
not get lost and will be ready for re-use
if the antenna needs to be stowed
again at a later date.
4. Verify that the antenna is able to rotate
freely in azimuth.
13.2.2. Removing the EL Shipping/Stow Restraint
1. The EL shipping/stow restraint is formed by
a stow pin-bolt mounted through a bracket
and is engaged into a hole/slot in the
elevation driven sprocket when the dish is at
zenith (90 degrees elevation).
2. In the stowed position, the hardware from
left to right is stow pin-bolt head, washer,
bracket, washer, hex nut, hex nut so that
the pin section of the stow pin-bolt is
inserted into the hole in the elevation driven
sprocket.
EL Stow Pin-Bolt head
Bracket
2 Hex Nuts
Pin inserted into Elevation Driven Sprocket
Elevation Driven Sprocket
13-6
EAR Controlled - ECCN EAR99