background image

Section 7 — Handling and Storage

Handle, transport and store carefully and securely to avoid accidental knocking over or other
severe physical impacts. Do not expose to direct heat sources. Do not over-pressurize.

Section 8 — Exposure Controls/Personal Protection

Respiratory: None

Protective Gloves: Leather gloves are recommended when handling cylinders.

Eye Protection: Eye protection is recommended when handling cylinders.

Other Protective Clothing or Equipment: Safety shoes are recommended when handling cylin-
ders.

Work Hygienic Practices: Wash thoroughly after handling. Wash contaminated clothing

before reuse.

Section 9 — Physical & Chemical Properties

Appearance:

Colorless gas

Physical State:

Gas

Odor:

Odorless

Solubility in Water: 260 mg/L

Section 10 — Stability and Reactivity

Stability: Stable under normal conditions of handling and use.

Conditions to Avoid: None

Section 11 — Toxicological Information

VALUE (LD50 or LC50)

Animal

Routes

Components

>788.696 ppm/4H

Rat

Acute Inhalation

1.1.1.2.3.3.3 Heptafluoropropane

The human health hazards of this product are expected to be similar to other liquefied gases
including N2, C02, CFCs, HCFCs, and HBFCs. Therefore, direct eye or skin contact with the
liquid or cold gas can cause chilling or possibly frostbite of exposed tissues.   Inhalation of high
concentrations can be harmful or fatal due to oxygen deprivation and/or heart irregularities
(arrhythmias). Misuse of the products by deliberately inhaling high concentrations of this gas
could cause death without warning. Persons with preexisting cardiac or central nervous sys-
tem disorders may be more susceptible to effects of an overexposure.

Section 12 — Ecological Information

No ecological information is available.

Section 13 — Disposal Considerations

Dispose of waste and empty cylinders as allowed by current Local, State/Province, or Federal
laws and regulations.

Section 14 — Transport Information

Proper Shipping Name: Heptafluoropropane
ID Number: UN3296
Hazard Class: 2.2
Packing Group: N/A
Labels: Non-flammable gas
Packing Instructions: 200

18

WARNING

CONCENTRATED AGENT AND BY-PRODUCT OF APPLICATION TO FIRE ARE TOXIC. AVOID

BREATHING OF FUMES OR PROLONGED EXPOSURE. ACCIDENTAL DISCHARGE DURING

HANDLING OR INSTALLATION MAY CAUSE SERIOUS INJURY. BEFORE ATTEMPTING TO

INSTALL THIS DEVICE, READ AND COMPLY WITH INSTRUCTIONS, WARNINGS, AND

LIMITATIONS CONTAINED IN THIS MANUAL. DO NOT LIFT, CARRY, OR HANDLE BY

SENSOR VALVE/DETECTOR. THE SENSOR/VALVE DETECTOR IS VISUALLY DESCRIBED IN

FIGURE 4 OF THIS MANUAL. DO NOT DROP. KEEP AWAY FROM HEAT. KEEP AWAY FROM

CHILDREN.

WARNING

PRIOR TO PERFORMING MAINTENANCE WITHIN THE PROTECTED

COMPARTMENT, ALWAYS INSTALL SAFETY PIN EXTINGUISHER SYSTEM

TO AVOID ACCIDENTAL DISCHARGE. AT COMPLETION OF MAINTENANCE,

REMOVE SAFETY PIN FROM TRIGGER ASSEMBLY, AND STORE IN

HOLDING TIE LOCATED ON CYLINDER.

OWNER’S MANUAL & INSTALLATION GUIDE

SEA-FIRE FM-200

®

 AUTOMATIC FIRE EXTINGUISHER MANUAL: PART NO.123-194

3

Summary of Contents for FD1000A











Reviews:

Related manuals for FD1000A