5
Attach the other end of the hose to adapter # 1 from the
cluster. Push the adapter in the Halkey-Roberts valve on
the boat and switch on the pump. The pump will go
through the two stage pumping system - a high speed fan
to quickly inflate your hull, and a piston pump to achieve
the desired pressure our FoldCats needs. It will
automatically stop once the pontoon is fully inflated at
desired pressure of 3.2 PSI.
Deflation
To deflate a chamber, simply
turn the yellow valve stem
clockwise with your thumb to
secure it in the down position.
This will let the air out of your
boat. Our boats do not require a
pump for deflation.
Swivel Seat Attachment for FoldCat
325fc & 375fc
The quick release swivel seat mount comes with 4 bolts, 4
wing nuts as shown below.
There are two
sets of quick
release swivel
seat mounts
included in any
of our SE375fc
packages and
one in the SE
325fc package.
On the SE 325fc, bolt the quick release swivel seat mount
in the center aluminum slat bench through the 4 predrilled
3/8” holes using the included bolts & wingnuts. On the SE
375fc, bolt the quick release swivel seat mounts in the
center of the 3rd rearmost aluminum slat and the first slat
from the bow through the 4 predrilled 3/8” holes using the
included bolts & wingnuts as shown below.
Please note,
the quick release seat mount(s) can stay attached to the
slat bench of the SE 325fc or SE375fc and never again
need to be disassembled.
Now slide the swivel seat(s) into the quick release swivel
seat mounts and
make sure that the spring loaded lever
mechanisms locks in place
.
Pedestal for Swivel Seat
(For 375fc Pro Angler’s Package. Optional for
325fc).
The Pedestal comes with four bolts and nuts to
attach it to the Swivel Seat.
Bolt the upper end of the pedestal to the swivel seat as
shown above. And then slide the other end of the pedestal
into the quick release swivel seat mounts and
make sure
that the spring loaded lever mechanisms locks in
place.
