8
FishSUP |
ASSEMBLY
Slide the skegs into the
bases and secure with the
clip. If a skeg will not slide
into its base, do not force
it. Refer to instructions
page 13.
The bases have strings
attached so the skegs can
be tied to the board.
When ready to inflate,
insert the adapter into the
valve, turn it to the right
until it is fully seated and
then begin inflation.
Valve stem should be in
the up position
The pressure gauge will
not begin to register
until the board begins
to get pressurized.
Pump until the working
pressure of between 12
and 15 PSI is reached.
Do not exceed 15 PSI
when inflating.
Motor and Battery
(OPTIONAL)
Clamp electric motor
to motor mount before
mounting battery.
Secure battery by
running the Sea Eagle
strap with buckle through
the D-rings. Strap
stretches when wet, check
strap frequently.
Fish Rig (OPTIONAL)
To assemble and install
the Swivel Seat Fish Rig,
please refer to the
supplemental
instructions at the end of
this manual.
Paddle Pocket
The paddle pocket at the
front of the foot pad.
Insert the blade when
carrying the board or
walking into the water.
Green Deluxe Kayak
Seat (OPTIONAL)
The Green Deluxe Kayak
Seat (DKSG) has two
internal bladders, two
one-way air valves and
two straps with clips for
securing the seat to the
D-rings.
One-Way Air Valve
(Found only on DKSG)
Tether the valve onto the
valve bases by stretching
the retainer rings to fit
over the groove in the
bases.
Note: Stretch the rings or
use a hairdryer or hot
running water to warm
ring if too tight.
