6
Also included is a
cluster of adapters,
with raised
numbers on each arm
of the cluster. The
adapter marked #1
is the only adapter
needed.
Firmly push adapter #1
it onto the grey tube
in the end of the hose.
Make sure that the
adapter is firmly seated
on the tube.
Locate the gray adapter
with red gasket. Press
and twist this adapter
firmly onto the gray tube
at the end of the black
hose.
The tube is glued in, do
not try to remove it.
Set the pump to the
desired pressure. PSI is
marked in yellow on the
dial.
Insert the adapter into
the valve. The adapter
does not lock in but
friction will hold it in
place.
Screw the other end of
the hose onto the red
inflation port on the
end of the pump.
FishSUP|
SETUP: VALVES & PUMPS
Press the ON button to
begin inflation.
The pump
automatically stops
once the pressure is
met.
Do not
turn off
pump, especially the
two stage BTP
Electric Turbo Pump.
Connect the quick
connector at the end of
the power cord to the
quick connector
attached to the pump.
