3
BP12 Single Stage Electric Pump
|
SETUP
Place the battery in the
middle compartment of the
carry bag. A passthrough
hole in the bag divider
allows for connection to the
pump. Push quick
connectors together. 1
LED will show red when
the battery is charging.
Charging is complete when
light turns from red to
green. Charging time is
usually half-an-hour, but
may take three or more
hours.
Sea Eagle Boats Inc.
19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • [email protected]
Recessed Valve
Valve stem must be in UP
(valve closed) position.
Insert adapter into the valve
and twist to the right.
The “hooks” on the adapter
will lock it into place.
Set pressure
Turn dial until pointer
indicates desired pressure.
Photo shows 3.2 PSI. Yellow
numbers are PSI, white
numbers are bars (metric).
Sea Eagle pressure settings
are listed to the right, or
check boat owner’s manual
for correct setting.
Press the ON button to
begin inflation.
The pump automatically
stops once the pressure
is met.
Do not
turn off
pump.
Keep pump in carry bag to
make transportation easy
and to protect the pump
from sand.
Warning:
Do not run
pump for more than 15
minutes. Allow 20 minutes
for cool down before
restarting.
Sea Eagle Battery Kit
(Optional)
1 - Quick Connector
2 - Charging Port
3 - Fuse protection
Plug the charger into an
outlet (120v). The LED
indicator light will show
green. Insert the
charger wire into the
battery charging port 2
Warning!
Use only
charger supplied with
battery.
