2
BP12
Includes the storage bag
with multiple compart-
ments, alligator clips and
inflation hose with adapter
Adapter:
Hook-In style adapter is intended for use with recessed valve
with a stem.
Groove in red gasket must
be facing outward. Pull
gasket off and reverse it if
necessary. Gasket may be
stiff upon first use, stretch
or kneed gasket to soften it.
BP12 Single Stage Electric Pump
|
SETUP
Screw the other end of
hose onto
red
inflation port
on the end of pump.
An access hole with
protective flap allows hose
to be attached without
taking pump out of bag.
Sea Eagle Boats Inc.
19 N. Columbia Street, Ste1, Port Jefferson, NY 11777 • 1-800-748-8066 • [email protected]
Push wire quick connect
into pump quick connect
until they click together. To
disconnect, press the catch
piece on top and pull apart.
Power Cord
Use power cord to
connect pump to a 12v
battery. The middle
compartment of bag is
for stowing power cord.
A passthrough hole in the
bag divider allows for
connection to the pump.
Auto or Marine Battery
Connect the black clamp to
the black (-) terminal or a metal
grounding point. Connect red
clamp to red (+) terminal. Refer
to auto’s owner’s manual for
details about the battery.
Remember: “Red to Red, Black
to Black.”
If needed, split the wire more
by pulling the clamps apart.
The black band can be slid
down too.
Warning!
Check carefully, on some batteries it
can be difficult to see the markings. Most automobile
red (+) terminals are clearly marked.
Danger!
Connecting to the wrong terminals could
cause wires to get hot. Do not grab hot wire, clamps
are non-conductive plastic and should remain cool. If in
doubt, knock clamp off with a shoe or other
non-conductive item or pull pump by its hose.
