15. Unplug the battery cable from the Charger cable.
16. When ready for use, install the battery and reconnect to
the housing cable.
20. Screw in the Vent Plug to seal the vent.
21. Replace the Buoyancy Control Chamber.
22. Replace the Outer Nose Cone making sure the key is
aligned correctly and insert the Latches and lock the
Nose Cone by giving them a half turn. See fig.12.
17. Make sure the seals and sealing surfaces are clean and fully
lubricated with the supplied grease EVERYTIME (you can
also buy this at your local hardware store) before
replacing the Inner Nose Cone. See fig. 9.
18. Replace the Inner Nose Cone making sure the key is
aligned correctly. See fig. 10.
19. Ensure the Vent O Ring is fitted correctly and fully
lubricated with the supplied grease EVERYTIME (you
can also buy this at your local hardware store).
See fig. 11.
19
18
Fig.10
O-Ring correctly fitted into
groove and lubricated
Fig.11
Rotate 180
o
to close
Fig.12
Close up view
PRO
GTI
VS SUPERCHARGED PLUS
GTS
Fig.9
Ensure sealing surface is clean and fully lubricated
Ensure the seals are clean and fully lubricated
GTS
Seals
Seals
Close up view
of seals
PRO
GTI
VS SUPERCHARGED PLUS
Silicone
Grease
Silicone Grease
