Sea-doo Islandia SE, Operator'S Manual

Page: 89 / 144

MAINTENANCE PROCEDURES
To add oil, unscrew oil cap. Place a
funnel into the opening and add the
recommended oil to the proper level.
Do not overfill.
F0 9 D0SY
1
TYPICAL
1. Oil cap
NOTE: Every time oil is added in en-
gine, the complete procedure ex-
plained above must be done. Oth-
erwise, you will have a false oil level
reading.
Properly reinstall oil cap and dipstick.
Engine Oil Change and Oil Filter
Replacement
The oil change and filter replacement
should be performed by an authorized
Sea-Doo Sport Boats dealer.
Engine Coolant
Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE: When available, it is recom-
mended to use biodegradable an-
tifreeze compatible with internal com-
bustion aluminum engines. This will
contribute to protect the environment.
Cooling system must be filled with
BRP premixed coolant (P/N 219 700
362) or with a water and antifreeze
solution (50% distilled water, 50% an-
tifreeze).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling sys-
tem is completely flushed and refilled.
Refer to an authorized Sea-Doo Sport
Boats dealer.
Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.
With boat on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
engine is cold.
F18E0NY
1
1. Level between marks when engine is cold
NOTE: The boat is considered level
when it is in water. When on a trail-
er, block the wheels and raise the
bow slightly with the trailer jack (if so
equipped) until the bumper rail is level.
Add coolant to have the level between
marks as required. Use a funnel to
avoid spillage.
Do not overfill.
Properly reinstall and tighten filler cap.
_______________
87