Reinstall engine cover and relatch
properly.
Cleaning
The bilge should be cleaned by an
authorized Sea-Doo dealer to remove
any fuel/oil/electrolyte deposits and
mildew.
Occasionally, wash the body with wa-
ter and soap (only use mild detergent).
Remove any marine organisms from
engine and/or hull. Apply non-abrasive
wax such as silicone wax.
CAUTION: Never clean fiberglass
and plastic parts with strong de-
tergent, degreasing agent, paint
thinner, acetone, etc.
To clean the engine cover and the
steering pole nose and top pieces,
use only flannel cloths or an equiva-
lent.
1
F22L0H0
1. Engine cover, steering pole nose and
top pieces
CAUTION: It is necessary to use
flannel cloths or an equivalent on
engine cover, steering pole nose
and top to avoid further damaging
the surfaces to clean.
To remove scratches on engine cover,
steering pole nose or top pieces, use
BOMBARDIER* Scratch Remover Kit
(P/N 861 774 800).
NOTE:
Be aware that when using any
scratch remover product, the part fin-
ish will turn to a dull appearance.
CAUTION: Never clean plastic parts
or engine cover with strong deter-
gent, degreasing agent, paint thin-
ner, acetone, products containing
chlorine, etc.
To clean the carpets, use 3M™ Citrus
Base Cleaner (24 oz spay can) or the
equivalent.
Stains may be removed from seat and
fiberglass with Knight’s Spray-Nine
†
from Korkay System Ltd or the equiv-
alent.
Respect the environment by ensuring
fuel, oil or cleaning solutions do not
drain into the waterways.
_____________________
83
Summary of Contents for 2006 3D RFI
