34
Hull
Inspect hull for cracks or damage.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow
of water and damage cooling system
or propulsion unit. Clean as necessary.
If any obstruction can not be removed,
refer to an authorized Sea-Doo dealer
for servicing.
TYPICAL
1. Inspect this area
Inspect leading edges of the impeller,
if they have nicks or bends perfor-
mance will be greatly reduced.
Bilge
Should water be present in the bilge,
use bilge pump or tilt the craft to the
rear and unscrew drain plugs if craft is
out of the water, as the case may be,
to completely empty the bilge.
Secure bilge drain plugs.
Battery
Fuel Tank and Oil
Reservoir
With the craft horizontal, fill the fuel
tank to specified level.
Check the oil level and refill reservoir
as necessary.
Check fuel tank/oil reservoir retaining
straps/fasteners.
Engine Compartment
Steering System
Assisted by another person, check
steering operation for free movement.
When the handlebar is horizontal, the
jet pump nozzle should be in the straight
ahead position. Ensure the jet pump
nozzle pivots easily when handlebar is
turned.
WARNING
Make sure drain plugs are properly
secured prior launching the craft in
water.
F01J3ZY
1
WARNING
Verify tightness of battery cables
to their posts and condition of re-
taining straps/fasteners. Do not
boost battery while installed.
WARNING
Should any leak or gasoline odor
be present, do not start the en-
gine. Consult an authorized Sea-
Doo dealer before use.
WARNING
Check handlebar and correspond-
ing steering nozzle operation be-
fore starting.
Smo2001-001a.book Page 34 Tuesday, May 23, 2000 2:18 PM
www.SeaDooManuals.net
Summary of Contents for 2001 LRV
Page 1: ...www SeaDooManuals net ...
Page 68: ...www SeaDooManuals net ...
