Manual revision 005
Section 4: Deploying and Operating SBE 63
SBE 63
21
Status
Command
GetSD
Get and display status data, which includes
all parameters related to setup of SBE 63
that can be input/modified. Many
parameters are not user-programmable,
and are programmed at the factory.
List and example below include
commands used to modify user-
programmable parameters:
•
Instrument type and serial number
•
Firmware version
•
Software used to upload firmware to SBE
63
•
Calibration date (days since
January 1, 2000)
•
Communication baud rate [
SetBaud=
]
•
Blue LED counter total on-time (sec)
•
Number of measurements to average per
sample [
SetAvg=
]
•
Interval between samples for autonomous
sampling [
SetInterval=
]
•
Delay before sampling after power is
applied [
SetBootDelay=
]
•
Data output format [
SetFormat=
]
•
Analog gain and offset
•
Begin sampling automatically when power
applied [
SetAutoRun=
]?
•
Update Blue LED counter with every
sample?
•
Serial pause (factory set; must be 1
for use with SBE 19
plus
V2 in Profiling
mode, 16
plus
-IM V2, or
37-IMP-ODO); can be 0 or 1 for other
integrations.
•
Enable echoing [
SetEcho=
]?
•
Internally calculated [based on settings]
Example:
(user input in bold)
S>
getsd
<StatusData DeviceType = 'SBE063' SerialNumber = '0013'>
<FirmwareVersion>3.0.1</FirmwareVersion>
<FirmwareDate>Apr 9 2013 10:30:28</FirmwareDate>
<CommandSetVersion>1.2</CommandSetVersion>
<LoaderVersion>SBE 63 FirmwareLoader V 1.0</LoaderVersion>
<CalibrationDate>04826</CalibrationDate>
<StatusConfig>
<BaudRate>009600</BaudRate>
[
SetBaud=
]
<BlueOnTime>0000000</BlueOnTime>
<SampleAvg>002</SampleAvg>
[
SetAvg=
]
<SampleInterval>00004</SampleInterval>
[
SetInterval=
]
<BootDelay>001</BootDelay>
[
SetBootDelay=
]
<OutFormat>01</OutFormat>
[
SetFormat=
]
<AnalogGain>2</AnalogGain>
<AnalogOffset>00</AnalogOffset>
<AutoRun>0</AutoRun>
[
SetAutoRun=
]
<BlueTupdate>0</BlueTupdate>
<SerPause>1</SerPause>
<Echo>1</Echo>
[
SetEcho=
]
<Flags>0x0023</Flags>
[internally calculated, based on
SetAutoRun=
and factory settings]
</StatusConfig>
</StatusData>
<Executed>
